 LMI radiant heating systems
are warming tile, stone, marble, vinyl, concrete, and
hardwood floors in kitchens, bathrooms, foyers, and more
every day. By installing a LMI system, these classic
surfaces become as livable as they are stylish. Your (bare)
feet will thank you. LMI is designed to go right in the
mortar layer beneath the floor coverings. Our freeform
cables can evenly warm the floor inside any room shape and
are installed while remodeling or in new construction.
A LMI system can be designed to warm an otherwise cold floor
covering or it can turn your entire floor surface into a
giant, efficient room radiator. Either way heat is provided
right at your feet where you need it most. The larger the
surface, the lower the actual surface temperature required.
A wall radiator may have a surface temperature of 180°F
while an 85°F heated floor will produce the same result!
Heat Trace Cables - Radiant Floor Heating:
 LMI’s
Silicon Jacket (SJ) Floor Warming Cable is factory terminated
and arrives on the job site complete and ready to install. It is
flexible, easily bends to accommodate existing or planned
built-ins, lays flat, and can cover the entire open floor area.
We also
carry Mineral Insulated Floor Warming Cable and products for pipe and tank
tracing and roof and gutter
snow melt applications.
|
120 Volt
Cable |
|
Model |
Heating
Floor Area |
Volts |
Watts |
Amps |
Cable Length |
|
Primary |
Secondary |
 |
|
FW12-15 |
15
sf |
20 sf |
120V |
218 |
1.8 |
30' |
|
FW12-25 |
25
sf |
40 sf |
120V |
372 |
3.1 |
53' |
|
FW12-40 |
40
sf |
55 sf |
120V |
456 |
3.8 |
76' |
|
FW12-50 |
50
sf |
75 sf |
120V |
612 |
5.1 |
101' |
|
FW12-70 |
70
sf |
105 sf |
120V |
924 |
7.7 |
142' |
|
FW12-80 |
80
sf |
120 sf |
120V |
1188 |
9.9 |
158' |
|
FW12-100 |
100
sf |
150 sf |
120V |
1176 |
9.8 |
197' |
240
Volt Cable
|
Model |
Heating
Floor Area |
Volts |
Watts |
Amps |
Cable Length |
|
Primary |
Secondary |
|
|
|
FW24-30 |
30
sf |
45 sf |
240V |
432 |
1.8 |
60' |
|
FW24-55 |
55
sf |
84 sf |
240V |
720 |
3.1 |
110' |
|
FW24-70 |
70
sf |
110 sf |
240V |
960 |
3.8 |
140' |
|
FW24-100 |
100
sf |
150 sf |
240V |
1224 |
5.1 |
200' |
|
FW24-140 |
140
sf |
215 sf |
240V |
1872 |
7.8 |
280' |
|
FW24-160 |
160
sf |
250 sf |
240V |
2328 |
9.7 |
320' |
|
FW24-170 |
170
sf |
255 sf |
240V |
2184 |
9.1 |
340' |
|
FW24-180 |
180
sf |
270 sf |
240V |
2592 |
10.8 |
360' |
|
Floor Warming Thermostats:
|
|
|
FL-1224P
|
120/240 Volt Electronic Floor Warming Thermostat
Thermostats with Built-in GFCI
Electronic on/off thermostat with integrated GFCI.
Ground Fault Circuit Interrupter (GFCI): The thermostat has integrated a Ground Fault Circuit Interrupter (GFCI, Class A). In case a ground fault should occur it will disconnect both lines to the heating element. The thermostat and the GFCI is a dual model suitable for 120/240V 50/60 Hz supply.
Individual programming of events:
The factory-set periods and/or temperatures can be deleted or changed according to requirement. Furthermore, the following programs can be selected:
- 4 events 6 days and 2 events day 7
- 4 events per day.
The clock thermostat is with adaptive function meaning the thermostat calculates when the heating has to be switched on to make sure that the comfort temperature is obtained at the required time.
Comfort mode:
The temperature can be temporarily changed for a single event. The comfort mode temperature is reset at the next event, and the thermostat will return to the scheduled event program.
Manual mode:
The scheduled event program can be cancelled e.g. during holidays, instead the temperature can be adjusted to e.g. 41°F (5°C) for frost protection. The new setpoint is valid until the manual mode is cancelled.
Monitoring of energy consumption:
Total switch-on time in percentage can be read-out within the latest 2 days, 30 days or 365 days. In this way the heat consumption can be controlled.
Temperature Limitation:
The UCCD is delivered with a floor sensor which can be used for:
Max. temperature limitation: Protection of e.g. wooden floors.
Min. temperature limitation: For better heating comfort.
Backup function:
In the event of a power failure, an internal circuit will maintain the programming and time. Only if the power failure exceeds 50 hours, the time will have to be reset.
It's safe
• C-UL LISTED.
• GFCI Class A, 5mA trip level.
• GFCI disconnects line and neutral (L2).
It's flexible and user-friendly
• Dual voltage 120V or 240V.
• Output relay 16A.
• Screw terminals.
• Easy switching between °F and °C.
• Inclined display for better read-out.
• Icons for easy understanding.
It's cost efficient and comfort
• built-in clock function for automatic comfort and setback temperature.
• Floor sensor.
Price $200.00.
|
|
|
|
Floor Warming Accessories:
|
|
|
|
SPK-FW
|
|
|
|
|
